Golf Ball Dispenser - Arm

Material: Premium PETG

🏌️♂️ GOLF BALL DISPENSER - ARM 🏌️♂️ (Arm assembly only)

The moving heart of the Golf Ball Dispenser - now available on its own. The Arm is the sliding delivery mechanism that carries each ball down the tower and sets it on the tee, precision 3D printed in premium PETG and finished in classic Masters green. Whether you're replacing a worn or damaged arm or keeping a spare on hand for your complete dispenser, this is the same arm we use in our full system - built to the exact same standard, and it ships ready to install with everything you need to fit it.

No tower. No ramp. No funnel. No feet. Just the arm assembly - done right.

🎯 WHAT IS THE ARM?

The Arm is the action piece of the Golf Ball Dispenser system - the sliding component that delivers a fresh ball to the tee, shot after shot, completely hands-free. Here's how it works: you load the ramp with golf balls, and they feed down into the tower. When you tap the pedal with your club, the Arm slides down inside the tower and sets a single ball right on the tee - one ball per pedal push. No bending, no reaching, no breaking your stance. If there's one part that earns its keep through pure repetition, it's this one. An arm that binds, sticks, or loses its shape turns a smooth rhythm into a frustrating one. This one doesn't.

🌟 WHY CHOOSE THIS ARM?

✅ THE WORKING COMPONENT

This is the part that does the job - the arm that slides down the tower and delivers your next ball straight to the tee. Smooth, precise, and dependable, it's engineered to hold its shape and keep the balls coming, session after session.

✅ HANDS-FREE, NO BENDING DOWN

Tap the pedal with your club and the Arm re-tees a fresh ball for you - one ball per push. Keep your stance, keep your rhythm, and rip through a bucket without ever stooping to re-tee by hand.

✅ PREMIUM PETG CONSTRUCTION

Unlike standard PLA plastic, the Arm is printed in premium PETG that withstands heat, sunlight, and UV exposure without warping or going brittle. That means it slides and delivers just as reliably in a hot garage, a sunny backyard, or out on the course as it does in an air-conditioned simulator room.

✅ PRECISION 3D PRINTED

Printed with tight tolerances so it slides clean and true inside the tower - accurate, smooth, and finished right, true to the original spec, so it fits your tower and performs exactly as it should.

✅ EVERYTHING YOU NEED TO INSTALL

This isn't just the bare arm. It ships with the securing nut, a wrench, and the golf ball attachment, so you can mount it, tighten it down, and get back to practicing without hunting for tools or hardware.

✅ BUILT FOR INDOOR & OUTDOOR USE

PETG's heat, UV, and warp resistance makes this arm equally at home in indoor simulator setups and outdoor practice environments - garages, backyards, driving ranges, and courses alike.

✅ MATCHES YOUR ORIGINAL SYSTEM

Finished in the same clean white as the arm in the full system - so a replacement drops in and looks factory-correct against your Masters-green tower, no mismatched parts.

✅ PERFECT REPLACEMENT OR SPARE

Don't replace your whole dispenser over one part. The Arm lets you swap in a fresh delivery mechanism, or keep a backup ready, at a fraction of the cost of a complete unit.

✅ READY TO INSTALL

Ships as a complete arm assembly with nut, wrench, and golf ball attachment - everything you need to fit it straight onto your existing Golf Ball Dispenser tower.

✅ COMMERCIAL-GRADE LICENSING

Licensed from the original designer christofer.jh, ensuring authentic design and genuine, quality-matched parts - not a knockoff that won't fit.

💯 WHAT'S INCLUDED:

🟢 GOLF BALL DISPENSER - ARM INCLUDES:

• 1x Golf Ball Dispenser Arm (the white sliding delivery piece)
• 1x Nut (secures the arm in place)
• 1x Wrench (for easy install and tightening)
• 1x Golf Ball Attachment

NOT included (arm assembly only): golf ball, tower, ramp, funnel attachment, adjustable feet, or flat-surface tee. This listing is the arm assembly on its own - intended as a replacement or spare for owners of the complete Golf Ball Dispenser. The same arm fits both the Standard and Pro XL, so there's no size to choose - it works with either.

📋 PRODUCT SPECIFICATIONS:

• Item: Golf Ball Dispenser Arm (arm assembly only)
• Material: Premium PETG (UV & heat resistant)
• Color: White
• Finish: Precision 3D printed
• Includes: Arm, nut, wrench, golf ball attachment
• Function: Slides down the tower to deliver one ball to the tee per pedal push
• Compatibility: Fits both the Standard and Pro XL Golf Ball Dispenser (same arm on both)
• Assembly: Simple - mounts to your existing tower with the included nut and wrench
• Use: Indoor & Outdoor

🎯 PERFECT FOR:

• Replacing a worn, cracked, or damaged arm
• Keeping a spare arm on hand
• Repairing your existing Golf Ball Dispenser
• Anyone who needs the arm piece only

🌤️ TRUE INDOOR & OUTDOOR DURABILITY:

PETG construction resists heat, sunlight, UV, and warping - so the Arm keeps sliding smooth and true whether it's sitting in a hot garage, a summer backyard, a driving range, or an air-conditioned simulator room. It's the same material we trust across our full dispenser line precisely because it holds up where ordinary PLA fails.

⭐ QUALITY YOU CAN TRUST:

• Premium PETG used in professional applications
• Precision 3D printed for strength and accuracy
• Tested for durability indoors and outdoors
• Built to the same standard as our complete Golf Ball Dispenser
• Officially licensed for authentic, quality-matched fit
• Backed by our commitment to quality

🛒 ORDER THE GOLF BALL DISPENSER - ARM TODAY - THE DURABLE PETG DELIVERY PIECE THAT RE-TEES YOUR BALL, SHOT AFTER SHOT, HANDS-FREE.

Purchased rights to print and sell from original designer christofer.jh, ensuring authentic quality and design integrity